How does a bicycle gearbox work?

For a novice cyclist, using the rear derailleur can be a bit difficult. Find out with us how changing a bicycle works and how to use it in the best way so as not to struggle. When we pedal, the motion of our legs is transmitted to the rear wheel that makes the bicycle move. This is possible because the pedals transform the reciprocating motion into the rotary motion of the crown. At the same time, the chain transmits this motion to the sprockets located on the rear wheel.

How does a bicycle gearbox work?

You have most likely noticed that the chainring of your bike has a larger diameter than the sprocket. This difference allows to amplify the motion and make the displacement more efficient. Through the use of the gearbox, you can vary the ratio between the crown and the pinion, increasing or decreasing the number of revolutions made by the rear wheel with respect to the revolutions of the pedals. Let’s see: Best bmx bikes

Why is it important to use bicycle shifters?

For an experienced cyclist, it may seem obvious, but for beginners learning how to change a bicycle can be very useful and can save a lot of effort. There are even some people who are afraid to use the gears and so they choose a bike without gears. In reality, the gearbox has a very important function and is often really indispensable.

The fatigue that you feel when you pedal is linked to the number of laps we do to push on the pedals. The gearbox is used to make us keep the right pedaling according to the road we are traveling on, that is, if we are on a flat path, uphill or downhill.

The ideal pedaling is around 70 rides per minute and allows you to do several kilometers without too much effort. Thanks to the gearbox, it is possible to always maintain the right pace.

Today on the market you can find many types of bicycles, from those without gears to bikes with even two gears. The choice of one type of bike rather than another depends on the use made of the bicycle.

Types of bicycles and gearboxes

Let’s see what types of bikes and gears you can find on the market so that you can choose the most suitable solution for you.

Bicycle without gear

It is the classic walking bicycle, which is suitable for short journeys, mostly flat or with not very demanding climbs and descents.

Bicycle with only one rear gearbox

This type of bicycle usually has a number of sprockets that can vary from 6 to 8 and between the smallest and the largest sprocket, there is a ratio of approximately 1 to 2. With the bicycle with only one rear gearbox, you can cover longer distances and even more challenging climbs.

Double geared bicycle

In this case, the number of sprockets varies from 7 to 11 and you can have 2 or 3 crowns. The bike has both front and rear gears and allows you to go practically anywhere effortlessly.

How to change the rear gears?

When shifting, the rear gears are usually used. The rear derailleur can usually be found on the right knob. This is the gearbox that is used the most and therefore, you have to get used to using it first. The change of the left, in fact, is used only in the most demanding situations.

The largest sprocket, which you can easily spot because it is the one closest to the wheel, serves to make pedaling easier and keep the speed slower. The smaller sprocket, which is located further out, allows you to go at maximum speed with maximum effort. Basically, if you downshift gears, you go from a softer gear to a harder one, as happens with a car gearbox.

You need to shift gears when you feel that your pedaling is getting too tiring in order to maintain a steady pace. For example, if you are going up a hill and the pedaling becomes harder, put your gear in a lower gear. When, however, the road back flat or is down, put a higher gear.

How to change the front gears?

There are usually 2 or 3 large front gears on a bike, which are also called chainrings. As we mentioned in the previous paragraph, the use of the front gears is less frequent.

The operation of the front gears is practically the opposite of that of the rear gears. Therefore, be careful as the smaller chainring will make pedaling easier, while the larger chainring will make pedaling harder.

Therefore, if you have to tackle some hills, it is best to use the smallest chainring. If, on the other hand, you have to go on a flat road, choose the largest crown.

How changing a bicycle works: Some more tips

After having seen how a bicycle shifter works, we now provide you with some other information, which will be very useful for you to use the shifter in an even easier way.

Anticipate the change

Get used to shifting to a lower gear when you are approaching a significant climb and not when you are already facing the climb. Shifting gears while pedaling hard is more difficult and can damage the bike.

Do not change gear while stationary

The gears are designed to allow you to change gear when the pedals are in motion. Therefore, remember to change only while you are pedaling.

Avoid crossing chains

Keep the largest rear sprocket set at the same time as the largest front chainring or vice versa. It is also okay to keep the largest rear sprocket and smallest front, or smallest rear and largest front. This way, you will avoid crossing chains and causing damage.

Do you find yourself with our advice on how to change a bicycle? If then, you want to make even less effort when pedaling, you can buy an e-bike. Thus, you will also have the support of the electric motor.

Keep reading: How to get a cruiser bike for men?

How To Choose The Best Jeans For Your Body Type

When it comes to choosing the best jeans for your body type there are a few things you should consider before investing in the right pair for you. Most people want a durable pair of jeans that will last a long time, this will be more sustainable and better if you want to avoid fast fashion. The most important things to consider when choosing jeans for your body type are…

What exactly is a CCTV Drain Survey?

When you suspect a problem with one of your drains or exterior pipes, you’ll want to consider speaking to an expert. Have you heard of CCTV drain surveys? If not, these types of surveys can provide a fast and less intrusive method for determining what’s going on. For homeowners who have noticed a slow draining sink or the tell-tales signs of a blocked drain, calling on the services of an expert in this technique is highly recommended.

Why Are Ranch Venues Perfect For Your Austin Wedding? 

Stats show that over 67% of Austin’s population is married. Ranch weddings are popular in Texas throughout the year. The rustic, versatile, beautiful feel of ranches can enhance the vibrancy and elegance of your weddings. While there are several ranch venues in Austin, it’s critical to book your venue early to avoid last-minute confusion.

Seven reasons to travel to Finland, the happiest country in the world

The first thing that comes to mind when thinking of Finland is an image of cold and snow, the contrasts between the midnight sun and the polar night, and all this because a third of its territory is in the Arctic Circle. But it is also known for being the land of ‘the thousand lakes’ and the home of Santa Claus, for its wonderful northern lights and, surprisingly, for being the happiest country in the world to live in according to the World Happiness Report made by the UN.

How to clean metal railings? Step by step tricks and effective solutions

In recent years the world of green, organic, and a particular sensitivity to the environment are outlining significant changes in every family. For this reason, more and more often, many people prefer to clean their apartments in a natural way without resorting to the help of chemicals that sometimes damage and pollute excessively. Metal railings are a separate chapter, as their cleaning differs according to the material they are made of and there is no universal rule to clean them optimally. Still, there are some precautions that can be adopted on a case-by-case basis, in the guide that follows, some advice on how to clean metal railings in a natural way.

How to clean metal railings?

  • Warm water
  • Vinegar
  • Lemon
  • Olive oil
  • Cotton
  • Microfiber cloth
  • Semi-hard bristle brush
  • Bicarbonate
  • Dry cotton cloth
  • Marseille soap

Step 1

To combat the metal railings’ dirt, whether they are made of wood, iron, steel or concrete. First of all, it is necessary to sweep away the largest of the dust that the wind generates continuously going to deposit mites, fine dust, and other invisible agents on the balustrades pathogens that go to stain the terraces. To do this, you can use two ways: the vacuum cleaner that allows you to change the heads (in this case, just use the smaller ones between one grate and the other carefully) and the more traditional broom, that is the broom used by the street sweepers, composed of several alternating layers that allow the dust not to deposit (as in traditional ones), but to remove it.

Step 2

Once you have eliminated the bulk of the dust from the metal railings, you can proceed in a more specific way by using natural products. If it is a wrought iron railing (the most common), just use a solution of warm water, vinegar, and lemon, scrubbing the surfaces with a microfibre cloth. To finish the polish, just put a few olive oil drops in a cotton swab and wipe it evenly. If, on the other hand, it is a concrete railing, no cloth is good, but rather a brush composed of semi-hard bristles, to be used vigorously together with bicarbonate. In this case, there is no need to go over further for polishing, as concrete is a more complex material.

Step 3

If it is a question of metal railings made of aluminum, it is sufficient to use a solution of warm water and Marseille soap. This should be applied evenly with a damp cloth. The same goes for plastic metal railings. In both cases, at the end of the operation, for stain-free drying, just wipe with a dry cotton cloth. On the other hand, for wooden metal railings, the matter is more delicate: sandpaper is used and sometimes even a grinder, in general, however, more specific products are needed.

Rub energetically for cleaning and softer for subsequent polishing. Choose cotton from a good brand.

Effective solutions to clean metal railings

Water and a cloth

The cleaning routine can be done using warm water and a cloth. This is the least risky option for cleaning stainless steel railings. Dry it with a towel or cloth to avoid water stains. Wipe the cloth in the same direction as the polish lines.

Mild detergent (liquid dishwasher) and a cloth

If your stainless steel railing shows signs of corrosion, contamination marks, or it’s been a long time since you last cleaned it and needs a more thorough cleaning. Make sure to rinse the surface thoroughly and, to prevent stains and splashes, dry the railing very well with a towel to avoid lime (hard water) stains.

The window cleaner for fingerprints

Fingerprints are one of the most common complaints about stainless steel railings and parts. Dry afterward very well with a dry cloth. There are new types of finishes for stainless steel railing that are fingerprint-proof.

Stainless steel cleaner

If your railing has stains or scratches, or if you need to polish your railing, a stainless steel cleaner will be a good option. These cleaners and brighteners can help minimize streaks and remove stains. They can also polish stainless steel surfaces perfectly. Read the instructions for the stainless steel cleaner carefully and test in an inconspicuous area. Make sure to rinse it off really well and dry it with a dry cloth.